Rough-country 781 Bedienungsanleitung PDF herunterladen (Seite 8)

56. Using two of the crossmember flag nuts and factory skid plate bolts attach the skid plate to the crossmember as

shown in Photo 28 & 29. Tighten with a 19mm socket.

57. Use stock hardware and a 19mm socket to bolt the skid plate to the gas tank mount. See Photo 30

58. Next if you are installing on a 4-door use the skid plate mount as shown in Photo 31. Use the supplied 9/16” x 1 1/2”

bolt, washers, and nut and the supplied 1/2” x 1 1/2” long bolt, washers, and nut to bolt the mount to the skid plate.

Tighten the 9/16” bolt with a 21mm socket and 22mm wrench and tighten the 1/2” bolt with a 19mm socket. Next use

factory hardware to bolt the mount to the frame. Tighten with a 19mm socket.

59. If installing on a 2-door the outside hole of the skid plate will bolt to the rear lower control arm bracket bolt.

60. Reinstall the front tires/wheels

using a 19mm deep well socket.

61. Lower the vehicle to the floor and proceed to the rear installation.

PHOTO 31

PHOTO 28

PHOTO 30

PHOTO 29

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Rough-country 781 Bedienungsanleitung Seite 8