Rough-country 1096 Bedienungsanleitung PDF herunterladen

1/4” WHEEL SPACER KIT FOR 5-5.5” WHEEL PATTERN

Thank you for choosing Rough Country for all your suspension needs.

Professional knowledge of disassemble/reassembly procedures as well as post installation checks must be known. At-

tempts to install these wheel spacers without this knowledge and expertise may jeopardize the integrity and/or operating

safety of the vehicle.

Please read instructions before beginning installation. Also please review tools needed list and make sure you have

needed tools.

Important Note: Spacers must be periodically checked to ensure tightness.

Kit Contents:

Part #1096 Qty 2-1/4”” Wheel Spacers

92109600

Tools Needed:

Torque Wrench

Floor Jack

Jack Stands

Sockets

Socket wrench

Installation Instructions

1. Chock the tires and jack up the vehicle.

2. Remove the lug nuts and remove the tire and wheel. If

retaining clips are present they must be removed for the

spacer to sit flat on the rotor surface. Note: Failure to

remove the factory retaining clips on the wheel studs

could result in a wheel /tire vibration.

3. Install the wheel spacers as shown. See Photo 3.

4. Reinstall the wheels and tighten to manufacturer specifica-

tions using a 19mm wrench. DO NOT EXCEED MANU-

FACTURER SPECIFICATIONS.

Post Installation

• Wheels must be re-torqued periodically. Visually inspect components and re torque

fasteners during routine vehicle service.

Photo 1

Seite 1

1/4” WHEEL SPACER KIT FOR 5-5.5” WHEEL PATTERN Thank you for choosing Rough Country for all your suspension needs. Professional knowledge of disasse

Keine Kommentare

Rough-country 1096 Bedienungsanleitung