Rough-country 1120 Bedienungsanleitung PDF herunterladen

HIGH CLEARANCE SKID PLATE FOR

97-02 AUTOMATIC / 6CYL JEEP TJ

92112000

Please read Information below!!

This kit is intended for use on 97-02 TJ Jeep models equipped with 6cyl / Automatics only!!! For all other

models, part # 1126 will be used.

Motor mount kit Part # 1156 & 1 1/4” Body Lift Part # 1157 is needed to install this high clearance transfer

case skid plate. Failure to install these kits could result in damage to the vehicle created by lack of clearance

between the motor / transmission to the body. Rough Country insists installing these kits before the high

clearance skid plate is installed to gain clearance and avoid damage to components.

Please note if this skid plate is used with Rough Country’s Long arm kit, the skid plate will install with the

1/2” x 2 1/2” bolts supplied. If installing without the Rough Country Long arm kit, the 1/2” x 1 1/2” bolts will

be used.

Please read all the instructions before beginning the installation. Check the kit hardware against the kit contents. Be

sure you have all the needed parts and understand where they go. Also please review the tools needed list and

make sure you have needed tools. If you have any questions please call us at 800-222-7023.

TOOLS NEEDED:

13mm Socket / Wrench

3/4” Socket / Wrench OR

18mm Socket / Wrench

9/16” Socket

TORQUE SPECS:

Size Grade 5 Grade 8

3/8” 30 ft/lbs 35 ft/lbs

1/2” 65 ft/lbs 90 ft/lbs

9/16” 95 ft/lbs 130 ft/lbs

INSTALLATION INSTRUCTIONS

PHOTO 1

PHOTO 2

REMOVE THE TRANSMISSION NUTS REMOVE THE FRAME RAIL BOLTS

1. After the motor mount kit and 1 1/4” Body lift is installed, proceed to high clearance skid plate installation.

2. Remove the transmission hardware that secures the transmission to the stock skid plate. See Photo 1. Retain the

stock hardware.

3. Make sure to support the transmission and transfer case with a floor jack or jack stand.

4. Remove the skid plate from the frame rail as shown in Photo 2 using a 3/4” wrench

5. Lower the transfer case skid plate down and remove from the vehicle.

KIT CONTENTS:

1-Skid Plate

1-Transmission Mount

1-Skid Plate Bracket

1-Bag Containing:

4-3/8” x 1” Bolts

6-1/2” x 1 1/2” Bolts

6-1/2’ x 2 1/2” Bolts

6-1/2” Flat Washers

4-7/16” x 1” Bolts

4-7/16” Lock Nuts

1 2

Inhaltsverzeichnis

Seite 1

HIGH CLEARANCE SKID PLATE FOR 97-02 AUTOMATIC / 6CYL JEEP TJ 92112000 Please read Information below!! This kit is intended for use on 97-02 TJ Jeep

Seite 2

6. Remove the stock transmission mount from the transmission using a 15mm socket. See Photo 3. 7. Secure the transmission mount to the bracket as s

Kommentare zu diesen Handbüchern

Keine Kommentare

Rough-country 1120 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Rough-country 1120 herunter. Rough Country 1120 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Rough-country 1120