Rough-country 1054 Bedienungsanleitung PDF herunterladen

JEEP JK WINCH BUMPER

Thank you for choosing Rough Country for all your suspension needs.

Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure you have all

needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.

PRODUCT USE INFORMATION

Please read instructions before beginning installation. Check the kit hardware against the parts list and product layout.

Be sure you have all needed parts and know where they go. Also please review tools needed list and make sure you

have needed tools.

If questions exist we will be happy to answer any questions concerning the function and correct use of this product.

The installer must verify that the mounting kit does not interfere with the factory air bag sensors, which must not be relo-

cated or modified in any way. The vehicles air bag system may not operate properly if the winch mounting kit is not

mounted in compliance with the vehicle manufacturers recommendations.

Optional Accessories are available for the Rough Country winch bumper including: See back page for info:

Part # 1055...Stinger

Part # 1056...Light Bar / Winch Guard

Part # 1058...D-Ring Kit

Kit Contents:

1054Box1

Bumper

1054Box2

Winch Plate

2-Flag Nuts

1054BAG1-

8-1/2” X 1 1/2” Allen Head Bolts

6-1/2” X 1” Allen Head Bolts

10-1/2” Flat Washers

8-1/2” Top Lock Nuts

2-1/2” x 1” Bolts

8-10mm Nuts

2-3/8” X 1 1/4” Bolts (For Fairlead)

2-3/8” Lock Nuts (For Fairlead)

92105400

Tools Needed:

18mm Socket / Wrench

5/16” Allen Wrench

9/16” Socket / Wrench

3/4” Socket / Wrench

Drill Motor

1/4” Drill Bit

1 2 3 4

JEEP JK WINCH BUMPER 1

Inhaltsverzeichnis

Seite 1 - JEEP JK WINCH BUMPER

JEEP JK WINCH BUMPER Thank you for choosing Rough Country for all your suspension needs. Please read instructions before beginning installation. Che

Seite 2

INSTALLATION INSTRUCTIONS 1. Place vehicle on a flat surface and set emergency brake. 2. Using a small phillips screwdriver, remove the 2 plastic s

Seite 3

10. Place the winch plate into position on the frame. See Photo 7. 11. Install the winch plate on the frame with the supplied 1/2” x 1” Bolts, washer

Seite 4

MAINTENANCE INFORMATION 1. Failure to securely tighten all bolts on the winch plate, winch, and fairlead can result in product failure, which may res

Kommentare zu diesen Handbüchern

Keine Kommentare

Rough-country 1054 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Rough-country 1054 herunter. Rough Country 1054 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Rough-country 1054