Rough-country 1156 Bedienungsanleitung PDF herunterladen

87-95 YJ & 97-06 TJ 1” MOTOR MOUNT KIT

Thank you for purchasing a Rough Country motor mount kit for your Jeep vehicle.

PRODUCT USE INFORMATION

We will not be responsible for any product that is altered. If question exist we will be happy to answer any questions con-

cerning the design, function, and correct use of our products.

Applications: Wrangler TJ, 1997+….2.5L, 2.4L & 4.0L Only

Wrangler YJ, 1987-1995…..2.5L, 4.0L & 4.2L Only

92115600

INSTALLATION INSTRUCTIONS

1. Place a floor jack under the bell housing with a block of wood to distribute the weight across the housing. Do not lift

the engine using the oil pan as a jack point.

2. Slowly raise the jack to slightly take the pressure off of the motor mounts.

3. Starting on the passenger side of the vehicle, remove the nut from the cross bolt that secures the rubber isolator to

the engine support bracket using a 18mm & 19mm wrench. See Photo 1.Do not remove the cross bolt at this time.

4. Remove the stock bolts and nuts that secure the mount to the frame using a 15mm wrench. Retain the factory

hardware. See Photo 2.

PREINSTALLATION NOTES

This kit will be installed on one side of the vehicle at a time.

A body lift must be installed to allow this kit to be installed.

Check OE motor mount bushings and studs to make sure they are in good operating shape. If needed new motor

mounts must be installed.

Tools Needed:

15mm Wrench

16mm Wrench

18mm Wrench

19mm Wrench

Floor Jack

Kit Content:

2-Motor Mount Spacer

2-Studs

2-10mm x 60mm bolts

2-10mm washers

Photo 1 Photo 2

1 2

Seite 1

87-95 YJ & 97-06 TJ 1” MOTOR MOUNT KIT Thank you for purchasing a Rough Country motor mount kit for your Jeep vehicle.

Seite 2

• Check clearance on engine and engine components. Check clearance between the fan and the fan shroud. • Re torque all fasteners after 500 miles. Vi

Keine Kommentare

Rough-country 1156 Bedienungsanleitung